1.塗布位置/基準/方向性 ・Oリング全体 2.塗布方法/条件

1.塗布位置/基準/方向性
・Oリング全体

2.塗布方法/条件
・塗布量を満足させる事

3.塗布状態
・切れ/過多/はみ出し/異物付着 無き事
※オイル量過多の場合、後工程(特に高温環境下)にて
外観ＮＧ（はみ出し）となるので塗布量を適時観察し調整する事
はみ出しがある場合はワイピングクロスで拭取実施の事

ผลลัพธ์ (อังกฤษ) 1:

Thing without sticking foreign objects / protrusion that

3. Coating state
, sharpness / excess / to satisfy the 1. Coating position / reference / direction
· o ring the entire

2. Coating method / conditions
-coating amount
※ If the oil level too much, events of wiping carried out in the wiping cloth If there is a protrusion that
adjust to timely observe the coating amount becomes
appearance NG and (squeeze-out) at (a high-temperature environment in particular) post-process

ผลลัพธ์ (อังกฤษ) 2:

Overall at the O ring at the position 2 coating and that at the reference direction, the amount of coating method and coating condition is satisfied at the state of overload is applied at the dead or adhesion of foreign matter sticking out and without excessive amount of oil *, especially under high temperature in the environment of NG (appearance) of washing and wiping cloth at all when it is time to look at the adjusting amount is issued since

ผลลัพธ์ (อังกฤษ) 3:

1. Dispensing position and standards and direction of
-O ring

2. coating methods and conditions
-to satisfy the amount

3 applying state
-without out excessive overflow / foreign bond thing
* oil amount too much if, after served in the process (especially under high-temperature environment)
（ misfit ） NG appearance since amount of timely observation and adjust it
if there is overflow in the wiping cloth wipe of implementing things