織田さん KDM ラインのシステム導入時に、１枠ごとの造型- 注湯-解

織田さん

KDM ラインのシステム導入時に、
１枠ごとの造型- 注湯-解枠の情報を CSV形式のファイルに出力する
アプリケーション (KDM_RDMCSV.exe)を用意してあります。

システム導入後、特に変更が加えられていないなら
以下の手順で必要な情報の取得が可能かと思います。


①使用するパソコンの任意のフォルダに KDM_APP フォルダを新規作成する。
②①で作成したフォルダにこのメールの添付ファイルを保存
③②のファイル名を変更
※ 拡張子 .ex_ を .exe に変更
④使用するパソコンに KDMファイルサーバ( サーバ名 KDMSRV)を接続する。
※以下のネットワークドライブの割り当てをする
ドライブ K
フォルダ \KDMSRVKDM
※事務所で使用しているパソコンは、そのままのネットワーク設定では
KDM ファイルサーバに接続できなかったと記憶しています。
ATMのIT スタッフ(ソンポンさん？ エーさん？ )に相談すれば
解決できるかと思います。
サーバ名：KDMSRV
機種：DELL PowerEdge2950
IPアドレス： 192.168.3.1
⑤ ③のKDM_RDMCSV.exe を起動
⑥ 起動したウィンドウの
The randam ... のリストボックスで KDM_MON * ( 上から３つ目)を選択
Year/Month を対象年月 に変更
⑦ [CSV] ボタンを押すとCSV ファイルの出力先を聞いてくるので
どこに出力するか指定して [OK]ボタンを押す。

以上でファイルが出力されます。出力したファイルは Excelで開けます。
項目名はすべて英語表記になっています。
PLAN_ で始まる項目：計画情報
SETUP_ で始まる項目：段取り情報
CAST_ で始まる項目：造型情報
POUR_ で始まる項目：注湯情報
DUMP_ で始まる項目：解枠情報
QTY_ で始まる項目：個数情報
試してみてください。

ผลลัพธ์ (อังกฤษ) 1:

ODA-San In the system KDM line introductionOutput 1 frame for each molding - pouring - solutions border information in the CSV fileApplication (KDM_RDMCSV.exe) are available. If after the introduction of the system, does not particularly changes were madeI think steps in getting necessary information available. < step >(1) computer to use any folder to KDM_APP folder to create.(2) (1) in the folder you created, save the attachments of this e-mail(C) (2) rename the file*.Ex_ modifies the.exe extension(4) computer to use to connect to KDM file (server name KDMSRV).* The following network drivesDrive KFolder \KDMSRVKDM* Office on your computer, in the network settingsTo remember the KDM file server could not be contacted.ATM professionals (Mr. somphong? EY's? ) To consultI think you can solve.Server name:KDMSRVModel: DELL PowerEdge2950IP address: 192.168.3.1(E) (iii) of boot KDM_RDMCSV.exe(6) the launch window The randam. The list box KDM_MON * (the third one from the top) selection Change the target date to Year/Month(7) pressing [CSV] CSV file output location soSpecify where to print, press the "OK" button. At least output file. The output file can be opened in Excel.All item names are written in English.PLAN _ with items starting: planning informationSETUP _ with items starting: Setup informationCAST _ in the starting items: modeling informationPOUR _ in the starting items: note water informationDUMP _ in starting items: solution frame informationQTY _ in the starting item: number informationGive it a try.

ผลลัพธ์ (อังกฤษ) 2:

Oda's when the system introduction of KDM line, molding per frame - pouring - outputs information on the solution frame to a file in CSV format you Yes to provide an application (KDM_RDMCSV.exe). After the system introduction, especially if the change has not been applied I think that whether it is possible to obtain the necessary information in the following procedure. <Procedure> ① I want to create a new KDM_APP folder to any folder of your computer that you want to use. In the folder that you created in ②① save the attachment of this e-mail the file name of the ③② change and change ※ the extension .ex_ to .exe to a computer that ④ used to connect the KDM file server (server name KDMSRV). ※ to the assignment of the following network drive drive K folder \ KDMSRV KDM personal computer you are using in the ※ office, in the intact network settings will remember that it was not able to connect to the KDM file server. ATM IT staff (Sonpon's? Er's?) If consult I think whether it can be resolved. Server Name: KDMSRV models: DELL PowerEdge2950 IP address: 192.168.3.1 ⑤ KDM_RDMCSV.Exe the start of ③ ⑥ start the window of (three from above the eyes) The randam ... KDM_MON * in the list box of the selected Year / Month the changes to the target date , since you press the ⑦ [CSV] button will ask the output destination of the CSV file by specifying where to output and press the [OK] button. The file is output above. The output file can be opened in Excel. All item name has become in English. Items starting with PLAN_: planning information beginning with SETUP_ item: setup information item starting with CAST_: molding information item starting with POUR_: pouring information item starting with DUMP_: solution frame information item starting with QTY_: number information please try.

ผลลัพธ์ (อังกฤษ) 3:

At his KDM line at the time of application of the system, the information of every 1 frame and molding pouring on the frame at the output of CSV format file KDM -- RDMCSV. Exe) is prepared. After introduction of the system of the following is not particularly at the changes were needed in the process of information can be acquired. Any personal computer using mixed procedure >
① folder to create a folder KDM -- APP. The folder that you created in the
②① save this email attachments.To change the file name extension to the estimation of ③② ex in a personal computer is used to change the
④ KDM EXE file server name KDMSRV server to connect to. The personal computer in the K folder must drive at the office if KDMSRV KDM estimation map network drive is used for estimation of the network can be connected directly to KDM file server and storage. The ATM IT staff Wednesday got? Agency? If the consultation.I think I can solve it. At the server name: at the KDMSRV model: DELL PowerEdge studies at address 3 of IP: 192.168.3.1
⑤ KDM RDMCSV -- about -- MON. In KDM at random. The window list box
⑥ start to start with from the third on the selection of Year and Month for years to change
⑦'s CSV button and the output of the CSV file at the hearing, so come to be given to OK button is pressed. Look at the above output file.Opens the file in the output Excel. The item name are all in English. In PLAN -- starting item: item information at the start. Sub. -- Planning SETUP: setup information CAST -- starting item: item information POUR molding -- started pouring in at the beginning DUMP -- information items in solution: at the start. Sub. -- QTY frame information: please try the number information.