results and discussion
3.1 effect of growth temperature on the morphology of synthesized
CNCs
FIG. 2 SHOWS the sem and tem images of the carbonaceous
products synthesized on pd nanoparticles at varios temperatures
(i.e600,700,and 800*c).the gas flow rates of ar,h2,and C2H2 are
5000,100,and 25 sccm, repectively.The samples synthesized at
600 *c is maninly CNCs (fig.2a),with very few straight CNFs,as
indicated dy the arrows.the CNCs grown at600 *c have a solid helical
structure and their diameter is approximately 100-150 nm,
as shown in fig.2a, b. By contrast, the curiy CNTs grown at 700*c
have a hollow structure and a diameter of approximately
20-30nm, as shown in fig. 2c, d.when the growth temperature
was increased to 800*c, thinner CNTs with a dismeter of
approximately 15-20nm were obtained,as shown in fig.2e,f.
according to baker,s theory [25], carbon atoms decomposed
from a carbom source gas diffuse into the catalyst particles and
precipitate on the surface to form carbon fiber,due to the
results and discussion3.1 effect of growth temperature on the morphology of synthesized CNCs FIG. 2 SHOWS the sem and tem images of the carbonaceousproducts synthesized on pd nanoparticles at varios temperatures (i.e600,700,and 800*c).the gas flow rates of ar,h2,and C2H2 are 5000,100,and 25 sccm, repectively.The samples synthesized at600 *c is maninly CNCs (fig.2a),with very few straight CNFs,asindicated dy the arrows.the CNCs grown at600 *c have a solid helicalstructure and their diameter is approximately 100-150 nm,as shown in fig.2a, b. By contrast, the curiy CNTs grown at 700*chave a hollow structure and a diameter of approximately20-30nm, as shown in fig. 2c, d.when the growth temperaturewas increased to 800*c, thinner CNTs with a dismeter of approximately 15-20nm were obtained,as shown in fig.2e,f. according to baker,s theory [25], carbon atoms decomposed from a carbom source gas diffuse into the catalyst particles andprecipitate on the surface to form carbon fiber,due to the
การแปล กรุณารอสักครู่..
![](//thimg.ilovetranslation.com/pic/loading_3.gif?v=b9814dd30c1d7c59_8619)
และการอภิปรายผล
3.1 ผลของอุณหภูมิในการเจริญเติบโตสัณฐานวิทยาของสังเคราะห์
CNCs
มะเดื่อ 2 แสดงภาพ SEM และ TEM
ของคาร์บอนผลิตภัณฑ์สังเคราะห์อนุภาคนาโนในPD ที่อุณหภูมิ varios
(i.e600,700 และ 800 * ค) ได้โดยเริ่มต้นอัตราการไหลของก๊าซเท่, h2 และ C2H2 มี
5000.100 และ 25 SCCM ตัวอย่าง repectively.The สังเคราะห์ที่
600 * c คือ maninly CNCs (fig.2a) มีน้อยมากตรง CNFs
เช่นระบุDY arrows.the CNCs ที่ปลูก at600 * c
มีขดลวดแข็งโครงสร้างและขนาดเส้นผ่าศูนย์กลางของพวกเขาจะอยู่ที่ประมาณ100-150 นาโนเมตรดังแสดงใน fig.2a ข
ในทางตรงกันข้าม curiy CNTs ที่ปลูกที่ 700 * c
มีโครงสร้างที่กลวงและขนาดเส้นผ่าศูนย์กลางประมาณ
20-30nm ดังแสดงในรูป 2c, d.when
อุณหภูมิการเจริญเติบโตเพิ่มขึ้นเป็น800 * C, CNTs ทินเนอร์ที่มี dismeter
ของประมาณ15-20nm ที่ได้รับตามที่แสดงใน fig.2e, f.
ตามขนมปัง, ทฤษฎี [25], คาร์บอนอะตอมย่อยสลาย
จากแหล่งที่มาของก๊าซ carbom
กระจายเป็นอนุภาคตัวเร่งปฏิกิริยาและเกิดการตกตะกอนบนพื้นผิวในรูปแบบคาร์บอนไฟเบอร์เนื่องจาก
การแปล กรุณารอสักครู่..
![](//thimg.ilovetranslation.com/pic/loading_3.gif?v=b9814dd30c1d7c59_8619)